METHOD & PROCESS PRINCIPLE
Quench and fractionation control cut points, reflux and side draws without excessive post-reactor cracking.
UNKA ENGINEERINGEPC CONTRACTORSeparates conversion effluent into gas, light liquids, diesel/gasoil-range material and heavy residue.

Quench and fractionation control cut points, reflux and side draws without excessive post-reactor cracking.
Main fractionator, trays/packing, pump-arounds, strippers, reboilers/exchangers, condenser and reflux drum.
Effluent composition, cut points, vapor/liquid traffic, fouling, pressure drop, heat integration and product targets.
Design Basis, material balance, PFD, P&ID, equipment and instrument datasheets, line/equipment lists, control narrative, cause-and-effect, layout/3D interfaces, inspection plan, operating and commissioning procedures.
Closed handling, relief/vent/drain routing, alarms and trips, hazardous-area classification, HAZOP actions, maintainable isolation, fire protection and emergency shutdown interfaces.
HPTC and comparable thermal-conversion systems.
ASME VIII, TEMA/API 660, API 520/521; EN/DIN or GOST code basis by contract.
ASME VIII, TEMA/API 660, API 520/521; EN/DIN or GOST code basis by contract.