METHOD & PROCESS PRINCIPLE
Cooling, condensation, phase separation, pressure control and optional compression/recovery are applied.
UNKA ENGINEERINGEPC CONTRACTORConditions and routes non-condensable gas and light hydrocarbons for fuel, recovery or safe disposal.

Cooling, condensation, phase separation, pressure control and optional compression/recovery are applied.
Condensers, separators, compressor where required, knock-out drums, fuel-gas/flare interface and analyzers.
Gas composition, pressure, condensation curve, H₂S, heating value, recovery objective and flare backpressure.
Design Basis, material balance, PFD, P&ID, equipment and instrument datasheets, line/equipment lists, control narrative, cause-and-effect, layout/3D interfaces, inspection plan, operating and commissioning procedures.
Closed handling, relief/vent/drain routing, alarms and trips, hazardous-area classification, HAZOP actions, maintainable isolation, fire protection and emergency shutdown interfaces.
Thermal conversion, refinery off-gas and light-ends systems.
API 520/521/537, ASME VIII, IEC hazardous area; GOST/EAC where jurisdiction requires.
API 520/521/537, ASME VIII, IEC hazardous area; GOST/EAC where jurisdiction requires.