METHOD & PROCESS PRINCIPLE
Non-catalytic or process-specific controlled thermal conversion is selected from feed characterization and product objectives.
UNKA ENGINEERINGEPC CONTRACTORProvides controlled temperature and residence time for cracking of heavy molecules.

Non-catalytic or process-specific controlled thermal conversion is selected from feed characterization and product objectives.
Reactor/soaker vessel, distributors, quench interfaces, thermowells, pressure protection and supports.
Reaction severity, residence time, pressure, vapor fraction, coke tendency, metallurgy and upset cases.
Design Basis, material balance, PFD, P&ID, equipment and instrument datasheets, line/equipment lists, control narrative, cause-and-effect, layout/3D interfaces, inspection plan, operating and commissioning procedures.
Closed handling, relief/vent/drain routing, alarms and trips, hazardous-area classification, HAZOP actions, maintainable isolation, fire protection and emergency shutdown interfaces.
Heavy-feed conversion packages where distillate recovery is required.
ASME VIII, API 520/521 and project metallurgy; EN 13445/DIN or GOST vessel basis if selected.
ASME VIII, API 520/521 and project metallurgy; EN 13445/DIN or GOST vessel basis if selected.